Huawei AR1200 Series User Manual

<Huawei> display users
User-Intf Delay Type Network Address AuthenStatus AuthorcmdFlag
34 VTY 0 00:00:12 TEL 10.138.77.38
Username : Unspecified
+ 35 VTY 1 00:00:00 TEL 10.138.77.57
Username : Unspecified
Run the display user-interface maximum-vty command to view the maximum number of VTY
user interfaces.
<Huawei> display user-interface maximum-vty
Maximum of VTY user:15
Run the display user-interface vty [ ui-number1 | ui-number ] [ summary ] command to check
the physical attributes and configurations of user interfaces.
<Huawei> display user-interface vty 0
Idx Type Tx/Rx Modem Privi ActualPrivi Auth Int
+ 34 VTY 0 - 14 14 N -
+ : Current UI is active.
F : Current UI is active and work in async mode.
Idx : Absolute index of UIs.
Type : Type and relative index of UIs.
Privi: The privilege of UIs.
ActualPrivi: The actual privilege of user-interface.
Auth : The authentication mode of UIs.
A: Authenticate use AAA.
N: Current UI need not authentication.
P: Authenticate use current UI's password.
Int : The physical location of UIs.
Run the display local-user command to view the local user list.
<Huawei> display local-user
----------------------------------------------------------------------------
User-name State AuthMask AdminLevel
----------------------------------------------------------------------------
admin A H -
ftp A F -
guest A A 15
----------------------------------------------------------------------------
Total 3 user(s)
Run the display vty mode command to view the message indicating that the machine-to-machine
interface is enabled. For example:
<Huawei> display vty mode
current VTY mode is Machine-Machine interface
4.4 Configuring a TTY User Interface
The True Type Terminal (TTY) user interface view is a command line view and is used to
configure and manage physical interfaces working in asynchronous and interactive mode.
4.4.1 Establishing the Configuration Task
Before configuring the TTY user interface, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain any data required for the configuration. This
will help you complete the configuration task quickly and correctly.
Applicable Environment
If you need to use an asynchronous serial port to log in to the router to perform local maintenance,
you can configure a TTY user interface. This includes configuring the physical attributes,
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration 4 Configuring User Interfaces
Issue 04 (2012-05-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
58

Huawei AR1200 Series Specifications

General

Brand	Huawei
Model	AR1200 Series
Category	Network Router
Language	English