Huawei AR1200 Series User Manual

Exit from the AAA view.
l Configuring password authentication
1. Run:
system-view
The system view is displayed.
2. Run:
user-interface console interface-number
The console user interface view is displayed.
3. Run:
authentication-mode password
The authentication mode is set to password authentication.
4. Run:
set authentication password { cipher | simple } password
A password for password authentication is set.
l Configuring non-authentication
1. Run:
system-view
The system view is displayed.
2. Run:
user-interface console interface-number
The console user interface view is displayed.
3. Run:
authentication-mode none
The authentication mode is set to non-authentication.
----End
4.2.6 Checking the Configuration
After configuring the console user interface, you can view information about the user interface,
physical attributes and configurations of the user interface, local user list, and online users.
Prerequisites
The configurations of the user management function are complete.
Procedure
l Run the display users [ all ] command to check information about the user interface.
l Run the display user-interface console ui-number1 [ summary ] command to check
physical attributes and configurations of the user interface.
l Run the display local-user command to check the local user list.
----End
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration 4 Configuring User Interfaces
Issue 04 (2012-05-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
50

Huawei AR1200 Series Specifications

General

Brand	Huawei
Model	AR1200 Series
Category	Network Router
Language	English