Huawei AR1200 Series User Manual

Configuration Roadmap
The configuration roadmap is as follows:
1. Specify FTP as the mode of uploading the system software, the device as the FTP server,
user 1 as the user name, and huawei as the user password.
2. Specify the system software and configuration file to be used at the next startup.
3. Save the configuration file and restart the device.
4. Verify the configuration.
Data Preparation
To complete the configuration, you need the following data:
l System software version before the upgrade, which is V200R001C00.cc in this example
l New system software version, which is V200R002C00.cc in this example
l Backup startup software version, which is V200R001C00_backup.cc
l Size of the remaining space of the storage media, which can store the system software
package
Procedure
Step 1 Upload the new system software.
# Configure the device as an FTP server.
<Huawei> system-view
[Huawei] ftp server enable
Info: Succeeded in starting the FTP server.
[Huawei] aaa
[Huawei-aaa] local-user user1 password simple huawei
info: A new user added
[Huawei-aaa] local-user user1 service-type ftp
[HuaWei-aaa] local-user user1 ftp-directory flash:/
[Huawei-aaa] quit
[Huawei] quit
After the preceding configurations are complete, run the display local-user command to check
information about the user.
<Huawei> display local-user
----------------------------------------------------------------------------
User-name State AuthMask AdminLevel
----------------------------------------------------------------------------
user1 A H -
user2 A A -
----------------------------------------------------------------------------
Total 2 user(s)
# On the PC, specify the binary format as the file transfer mode, and c:\temp as the working
directory.
NOTE
The Windows XP operating system is used as an example.
Store the uploaded file in the specified directory (C:\temp in this example). Choose Start >
Run and enter cmd. Then, press Enter. Enter FTP 10.1.1.1. At the prompt of "user", enter the
user name. At the prompt of "password", enter the password. The following configurations are
displayed:
C:\Documents and Settings\Administrator> ftp 10.1.1.1
Connect to 10.1.1.1.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration 9 Upgrade and Maintenance
Issue 04 (2012-05-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
216

Huawei AR1200 Series Specifications

General

Brand	Huawei
Model	AR1200 Series
Category	Network Router
Language	English