srvprofile-id 10
ont alarm-profile 1 1 profile-id 1
ont alarm-profile 1 2 profile-id 1
quit
traffic table ip index 9 cir off priority 6 priority-policy tag-In-Package
service-port 3 vlan 200 gpon 0/1/1 ont 1 gemport 2 multi-service user-vlan 20 rx-
cttr 9 tx-cttr 9
service-port 4 vlan 200 gpon 0/1/1 ont 2 gemport 2 multi-service user-vlan 20 rx-
cttr 9 tx-cttr 9
queue-scheduler wrr 10 10 20 20 40 0 0 0
cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6 6 cos7 7
save
3.3.5 Configuring the GPON FTTH VoIP Service (SIP Protocol) on
the OLT CLI
The OLT is connected to the remote ONT through a GPON port to provide users with the IP-
based high-quality and low-cost VoIP service.
Service Requirements
l The ONT is connected to the SIP server through SIP.
l The ONT obtains the IP address through DHCP.
l Two phone sets are connected to two TEL ports of the ONT respectively, and calls can be
made between two phone sets.
l Users of phone sets under different ONTs can call and communicate with each other.
l The DBA mode of the VoIP service is assured bandwidth + maximum bandwidth, and no
rate limitation is performed on the upstream and downstream traffic.
Table 3-8 Data plan
Item
Data
OLT S-VLAN ID: 200
S-VLAN type: smart VLAN
Upstream port: 0/19/0
C-VLAN ID: 20
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual 3 Configuration
Issue 02 (2011-12-08) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
167
To Next Page
Loading...
Need help?
General
