Step 7 Check the registration status of the voice user.
In the navigation tree, choose Status > VoIP Information. In the right pane, User Status is
Up.
----End
Result
l User 1 with telephone number 88001234 can call user 2 with telephone number
88001235, and the communication between them is normal. The communication is also
normal for user 2's calling user 1.
l Check whether the voice communication between users using different ONTs is normal.
3.4.6 Configuring the H.248-based Voice Service on the Web Page
This topic provides an example of how to configure the H.248-based voice service on the Web
page.
Prerequisite
l The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT
commands. For details, see Enabling Layer 2 Service Channels Between an OLT and
a GPON ONT (on the OLT CLI).
l You have established the environment for logging in to the Web page for service
configuration and have successfully logged in to the Web page. For details, see 3.4.3
Locally Logging in to the Web Interface.
l Two telephone sets must be available and each must be connected to ports TEL1 and TEL2
respectively on the ONT.
Context
NOTE
Some voice parameters cannot be configured on the Web page but can be configured by importing an XML
configuration file. For details about how to import an XML configuration file, see 3.6.1 Operation Guide on
the XML Configuration File (on the Web Page).
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual 3 Configuration
Issue 02 (2011-12-08) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
224
To Next Page
Loading...
Need help?
General
