12.3 Logging In to the MM910 WebUI
Scenarios
Log in to the MM910 WebUI. On the MM910 WebUI, you can configure and manage the
chassis, MM910, compute nodes, switch modules, power modules, and fan modules. The
following uses Internet Explorer 11.0 as an example.
NOTE
l The user account will be locked if the user enters incorrect passwords for five consecutive times. Do
not attempt to log in within 10 minutes after the user account is locked. Otherwise, the lock is rest to
10 minutes even if the user name and password are correct.
l An account can log in to the MM910 WebUI only through one IP address at a time. If an account has
logged in and the same account logs in through another IP address, the account that has logged in
will be logged out.
l After logging in to the MM910 CLI or WebUI, you are logged out of the management UI if you do
not perform any operation within a specified time period. The default lockout duration of the CLI is
2 minutes and that of the WebUI is 5 minutes. You can change the lockout duration as required.
l The MM910 supports a maximum of 32 clients to log in to the WebUI and 100 clients to log in to
the CLI at the same time.
l The WebUI of the standby MM910 (displayed as "This is the standby MM.") does not display the
component installation status. After logging in to the WebUI of the standby MM910, you can view
monitoring information about the active MM910, set the DHCP and static IP addresses, and set and
query the thresholds and hysteresis of the sensors of the standby MM910. To perform other
operations, log in to the WebUI of the active MM910.
l For details about operations on the WebUI, see the Online Help.
Procedure
Step 1 Check that the MM910 client meets the runtime environment requirements.
If you want to use the remote control function, ensure that the Java Runtime Environment
(JRE) meets requirements.
Table 12-2 Runtime environment requirements
Operating System
Web Browser JRE
l Windows 7 32-bit/64-bit
l Windows 8 32-bit/64-bit
l Windows Server 2008
l Windows Server 2012
l Internet Explorer 9 or
later
l Mozilla Firefox 19.0 to
31.0
l Chrome 22.0 to 31.0
l JRE 1.6 or later for
MM910 versions earlier
than (U54)5.51
l JRE 1.7 or later for
MM910 (U54)5.51 and
later
l Red Hat 4.3 to 6.0 l Mozilla Firefox 19.0 to
31.0
l JRE 1.6 or later for
MM910 versions earlier
than (U54)5.51
l JRE 1.7 or later for
MM910 (U54)5.51 and
later
FusionServer Pro CH121 V5 Compute Node
User Guide
12 Common Operations
Issue 06 (2019-08-10) Copyright © Huawei Technologies Co., Ltd. 139
To Next Page
Loading...
Need help?
General