Documents
l Configure the iBMC. The configuration method varies depending on the iBMC version.
For details, see FusionServer Pro E9000 Server iBMC User Guide.
l Configure RAID settings. For details, see Huawei V5 Server RAID Controller Card
User Guide.
l Configure BIOS settings. For details, see Huawei Server Purley Platform BIOS
Parameter Reference.
l Install the operating system. For details, see Huawei Server OS Installation Guide.
l Handle alarms. For details, see FusionServer Pro E9000 Server V100R001 HMM
Alarm Handling.
l Rectify faults. For details, see Huawei Servers Troubleshooting.
4.3.3 Changing Initial Passwords
4.3.3.1 Changing the Initial Password of the Default iBMC User
Scenarios
This section describes how to change the initial password of the default iBMC user on the
iBMC WebUI.
You can change the initial password of the default iBMC user on:
l MM910 WebUI
For details, see MM910 Management Module V100R001 User Guide.
l MM910 CLI
For details, see MM910 Management Module V100R001 Command Reference.
l iBMC WebUI
For details, see FusionServer Pro E9000 Server iBMC User Guide.
l iBMC CLI
For details, see FusionServer Pro E9000 Server iBMC User Guide.
NOTE
l The default user name of the iBMC is Administrator, and the default password is Admin@9000.
l For security purposes, change the initial password upon the first login and change the password
periodically.
l You are advised to use a password that meets complexity requirements or to enable the password
complexity check function.
l The password complexity check function is enabled by default.
Procedure
Step 1 Log in to the MM910 WebUI.
For details, see 12.3 Logging In to the MM910 WebUI.
Step 2 On the HMM Web page, choose System Management.
The System Management page is displayed.
FusionServer Pro CH121 V5 Compute Node
User Guide
4 Installation and Configuration
Issue 06 (2019-08-10) Copyright © Huawei Technologies Co., Ltd. 78
To Next Page
Loading...
Need help?
General