Huawei FusionServer Pro CH121 V5 User Manual

4.3.2 Configuration Overview
Configuration Process
Figure 4-5 Initial configuration process
Table 4-3 Process description
Step
Description
Change the initial
passwords
Initial password of the default iBMC user
Check the compute node
l Ensure that the compute node version meets site
requirements.
l Ensure that no alarm is generated for the compute node.
Set the iBMC IP address Set an iBMC IP address for the compute node
Configure RAID Configure the corresponding RAID array based on service
scenarios.
Configure the BIOS Configure the BIOS of the compute node, including the boot
mode, NIC PXE function, and BIOS password
Install the OS Install an OS for the compute node
FusionServer Pro CH121 V5 Compute Node
User Guide
4 Installation and Configuration
Issue 06 (2019-08-10) Copyright © Huawei Technologies Co., Ltd. 77

Huawei FusionServer Pro CH121 V5 Specifications

General

Brand	Huawei
Model	FusionServer Pro CH121 V5
Category	Server
Language	English