Figure 4-11 Setting an IP address for the management network port
3. Click Edit.
Edit the iBMC IP address of the compute node in a specific slot.
4. Click Save.
The iBMC IP address is set.
----End
4.3.6 Configuring RAID
The CH121 V5 supports multiple types of RAID controller cards.
l Use Intelligent Computing Compatibility Checker to obtain information about the
compatible RAID controller cards.
l The configuration method varies depending on the RAID controller card model. For
details, see Huawei V5 Server RAID Controller Card User Guide.
4.3.7 Configuring the BIOS
Scenarios
This section describes how to configure the BIOS of the compute node.
To configure the BIOS, perform the following operations:
l Set the system boot sequence
l Set PXE for a NIC
l Set the BIOS password
l Select a language
For details about other configurations, see Huawei Server Purley Platform BIOS
Parameter Reference.
FusionServer Pro CH121 V5 Compute Node
User Guide
4 Installation and Configuration
Issue 06 (2019-08-10) Copyright © Huawei Technologies Co., Ltd. 83
To Next Page
Loading...
Need help?
General