Figure 12-24 Factory settings restored
Step 4 Disconnect the main power supply to the device, and power it on again.
Step 5 After the restart completes, the LCD displays the Quick Settings screen for setting
parameters.
After the system is restored to factory settings, the user password is also reset to the preset
password, and must be promptly
modied to ensure information security and normal
system running.
----End
12.19 Which Parameters Will Restore to Default Values
After Default Settings Are Restored?
After you choose Settings > Restore Defaults > Conrm, the following
parameters are displayed:
● All parameters displayed on Settings > System Settings.
● All parameters displayed on Settings > Alarm Settings.
● All parameters displayed on Settings > Comm Settings.
● All parameters except for language and time settings displayed on Settings >
Quick Settings.
● Date format and time zone settings displayed on Settings > User Settings.
● All parameters displayed on Maint > Sensor Calibration.
To prevent key data from losing, you are advised to record all parameter values or
back up exported data before restoring default settings. Then change the
parameter values back to the recorded values after restoring default settings.
NetCol5000-A050 In-row Air Cooled Smart Cooling
Product
User Manual 12 FAQ
Issue 08 (2021-09-17) Copyright © Huawei Technologies Co., Ltd. 310
To Next Page
Loading...
Need help?
General
