Huawei P40 Pro+ User Manual

Power Your Device On and
O
To power o your device, press and hold the Power button for a few seconds, touch Power
o and Touch to power o.
To power on your device, press and hold the Power button for a few seconds until your device
vibrates and displays the logo.
Restart Your Device
Restart your device on a regular basis to clear the cache and keep the device in an optimal
state. A restart can sometimes resolve the issue when your device encounters a problem.
Just press and hold the Power button for a few seconds, then touch Restart and Touch to
restart.
Force Restart Your Phone
You can force restart your phone if it isn't working or won't turn o normally. To do this, just
press and hold the Power button for 10 seconds or longer.
Charging
Charge Your Phone
Your phone will alert you when it is running out of power. Please make sure to charge your
phone in time to prevent it from turning o automatically when the power runs out.
Pr
ecautions for Charging
• Charge your phone using the standard adapter and USB cable that came with your device.
Using other chargers or USB cables may cause repeated restarts, slow charging,
overheating, or other undesirable eects.
• Your phone will automatically run a safety check when a charger or other device is
connected to the USB port. If moisture is detected in the USB port, your phone will
automatically activate safety measures and stop charging. Disconnect your phone from the
USB port and wait until the USB port is dry.
• The time required to fully charge the battery depends on the ambient temperature and age
of the battery.
• Batteries have a limited number of charge cycles. When the battery life becomes noticeably
shorter, go to an authorized Huawei Customer Service Center to replace the battery.
• Do not cover your phone or charger during charging.
• Your phone may heat up when you have been using it for an extended period of time,
especially in high temperatures. In this case, stop charging, disable some features, and
move your phone to a cool place.
• Please do not use your phone while it is charging.
Essentials
16

Huawei P40 Pro+ Specifications

General

Screen shape	Curved edge screen
Pixel density	441 ppi
Display diagonal	6.58 \
Touchscreen type	Capacitive
Display resolution	2640 x 1200 pixels
Maximum refresh rate	90 Hz
Rounded display corners	Yes
Display number of colors	16.78 million colors
Processor cores	8
Processor family	Hi-Silicon
Processor frequency	2.86 GHz
Processor lithography	7 nm
Processor architecture	ARM Cortex-A76
RAM capacity	8 GB
Compatible memory cards	Nano Memory (NM)
Maximum memory card size	256 GB
Internal storage capacity	512 GB
Optical zoom	10 x
Rear camera type	Penta camera
Front camera type	Dual camera
Maximum frame rate	7680 fps
Rear camera aperture number	1.9
Front camera aperture number	2.2
Video capture resolution (max)	- pixels
Rear camera resolution (numeric)	50 MP
Front camera resolution (numeric)	32 MP
Third rear camera aperture number	4.4
Fourth rear camera aperture number	2.4
Second rear camera aperture number	1.8
Third rear camera resolution (numeric)	8 MP
Second rear camera resolution (numeric)	40 MP
4G standard	LTE
3G standards	WCDMA
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax)
Bluetooth version	5.1
SIM card capability	-
Mobile network generation	5G
Subscription type	No subscription
USB version	3.2 Gen 1 (3.1 Gen 1)
USB connector type	USB Type-C
Color name	Ceramic White
Form factor	Bar
Product color	White
Protection features	Dust resistant, Water resistant
International Protection (IP) code	IP68
Graphics card	Mali-G76
Platform	Android
App distribution platform	Huawei AppGallery
Operating system installed	Android 10.0
AC adapter power	40 W
Talk time (3G)	- h
Battery capacity	4200 mAh

Weight and Dimensions

Depth	9 mm
Width	72.6 mm
Height	158.2 mm
Weight	226 g