iSeries Model 520 115
Draft Document for Review October 18, 2004 5486m520.fm
– #2640 DVD-ROM
– #5751 DVD-RAM
System console attachment adapter
– #5540 System Console on Twinaxial Workstation IOA
• #4746 PCI Twinaxial IOA (can be placed in either slot P1-C5 or P1-C2)
– #5544 System Console on Operations Console
• #0367 Operations Console PCI Cable (attaches to #9793)
– #5546 System Console on 100 Mbps Token Ring
• #2744 PCI 100 Mbps Token Ring IOA (can be placed in either slot
P1-C5 or P1-C2)
• #0367 Operations Console PCI Cable
– #5548 System Console on 100 Mbps Ethernet
• #2849 10/100 Mbps Ethernet Adapter (can be placed in either slot
P1-C5 or P1-C2)
• #0367 Operations Console PCI Cable
– #5550 System Console on HMC
The Hardware Management Console is required for systems using logical
partitions (LPARs), IBM Eserver Capacity Upgrade on Demand (CUoD)
and redundant Service Processor operations.
#7884 520 Rack Mount (4 EIA Units. Includes 28” rack mounting rails) or
#7885 520 Deskside.
Optional features
The optional features for the 520 system unit include:
The 520 deskside can be converted to a rack mount (available March 31st
2005)
If a Peripheral Component Interconnect (PCI) disk controller is required in the
system unit, choose one of the following controllers:
– #5715 PCI-X Tape/DASD Controller
Provides support for up to four disk units. This controller supports data
mirroring. It does not support RAID-5 or data compression.
– #5703 PCI-X RAID Disk Unit Controller
Provides support for up to four disk units. This controller supports RAID
but does not support hardware data compression.
To Next Page
Loading...
Need help?
General