iSeries I/O adapters and controllers 375
Draft Document for Review October 18, 2004 5486IOA.fm
Refer to the IBM Eserver iSeries and AS/400e System Builder, SG24-2155, for
feature descriptions.
Homologation
Homologation is the process to obtain a country’s (region’s) government approval
to ship a device and connect it to the country’s (region’s) telecommunications
network. The action is similar to Federal Communications Commission (FCC)
approval in the United States.
There are features on the system that require homologation by a country’s
(region’s) government organizations, usually Post Telephone and Telegram
(PTTs) departments. The following table summarizes the PCI features that may
require homologation in certain countries (regions).
Feature code Description
#0032 High-speed modem
#2750 PCI ISDN Bri U IOA - 2-wire
#2751 PCI ISDN Bri S/T IOA - 4-wire
#2761 PCI Integrated Analog Modem
#2772 PCI Two-Line WAN with integrated modems
#2773 PCI Two-Line WAN with integrated modems
#2793 PCI Two-Line WAN with integrated modem
#2794 PCI Two-Line WAN with integrated modem
#2805 PCI Quad Modem IOA
#2806 PCI Quad Modem IOA
#4750 PCI ISDN Bri U IOA - 2-wire
#4751 PCI ISDN Bri S/T IOA 4-wire
#4761 PCI Integrated Analog Modem
#9771 Base PCI Two-Line WAN with Modem
#9793 Base PCI Two-Line WAN with modem
#9794 Base PCI Two-Line WAN with modem
To Next Page
Loading...
Need help?
General