iSeries I/O processors 333
Draft Document for Review October 18, 2004 5486IOp.fm
For a non-U.S.A. keyboard or mouse and display, see:
http://www.iseries.ibm.com/windowsintegration
OS/400 V5R2 plus PTFs, or later, is required. For required PTF information, refer
to Informational APAR II13609 at:
http://www.ibm.com/eserver/iseries/support
Migration tower PCI hardware
Some or all of the IOPs in the following sections were withdrawn from marketing.
This section offers a reference to assist in planning system upgrades.
#2809 PCI LAN/WAN/Workstation IOP
The #2809 PCI LAN/WAN/Workstation IOP can be used for attaching PCI LAN,
WAN, and workstation IOAs to the system. The #2809 supports different
combinations of cards depending on where it is installed on the #503x Migration
Tower. It is supported for migration only on the #503x Migration Tower.
The #2809 was
withdrawn from marketing on 31 May 2001.
#2824 PCI Feature Controller
This IOP is a feature I/O processor with 32 MB of memory installed on the #5034
and #5035 Migration Tower I, the #5055 Storage Expansion Unit, and the #5066
1.8 M I/O Tower. It is supported for migration only on the #503x Migration Tower.
The #2824 was
withdrawn from marketing on 29 December 2001.
#2865 PCI Integrated Netfinity Server
The #2865 PCI Integrated Netfinity Server contains an Intel 333 MHz Pentium II
processor, four main storage slots, and two LAN IOA slots. The #2865 provides
high performance serving to LAN attached PCs. OS/2® Warp Server for AS/400,
Novell NetWare, Lotus Domino, Flowmark, Firewall for AS/400, and Microsoft
Windows NT Server are supported on the Integrated Netfinity Server.
Important: Keep in mind that IBM Eserver i5 520, 550, 570, and 595, and
iSeries 800, 810, 825, 870, and 890 models do not support migration towers.
To Next Page
Loading...
Need help?
General