5486IOA.fm Draft Document for Review October 18, 2004
356 IBM Eserver i5 and iSeries System Handbook
#1016 Modem Cable-Germany
#1017 Modem Cable-U.K.
#1018 Modem Cable-Iceland/Sweden
#1020 Modem Cable-China (Hong Kong S.A.R.)/New Zealand
#1021 Modem Cable-Finland/Norway
#1022 Modem Cable-Netherlands
#1023 Modem Cable-Swiss
#1024 Modem Cable-Denmark
#1025 Modem Cable-U.S.A./Canada
Cable features supported with the #2806 are:
#1019 Modem Cable-Australia
#1020 Modem Cable-China (Hong Kong S.A.R.)/New Zealand
When used as a Direct Attached Adapter for Linux, order the #0616 in place of
the #2805, and order the #0617 in place of the #2806.
OS/400 V5R1 (with PTFs) or later is required. For required PTF information,
availability, and ordering information, refer to Informational APAR II13079 at:
http://www-912.ibm.com/supporthome.nsf/document/10000035
#2849/#9749 10/100 Mbps Ethernet Adapter
The #2849 10/100 Mbps Ethernet Adapter and #9749 card allows an iSeries
server to attach to standardized 100 Mbps high speed Ethernet LANs and allows
attachment to existing 10 Mbps Ethernet LANs. The adapter comes standard
with an RJ45 connector for attachment to UTP-5 media.
The #2849 is not supported on any Integrated Netfinity or Integrated xSeries
Server.
When used as a Direct Attached Adapter for Linux, order the #0623 in place of
the #2849.
#4745 PCI 2-line WAN IOA
The #4745 PCI 2-line WAN IOA supports up to two multiple protocol
communications ports when one of two (in any combination) of these cables are
attached:
#0348 V.24/EIA232 20-ft./6m PCI cable
#0349 V.24/EIA232 50-ft./15m PCI cable (
withdrawn from marketing 03
December 2002)
#0353 V.35 20-ft./6m PCI cable
To Next Page
Loading...
Need help?
General