iSeries Model 890 243
Draft Document for Review October 18, 2004 5486m890.fm
#2498 24/32-way (POWER4 1.3 GHz) includes:
– Processor Capacity Card (CCIN 2488)
– Processor 0 (CCIN 25D3)
– Processor 1 (CCIN 25D3)
– Processor 2 (CCIN 25D3)
– Processor 3 (CCIN 25D3)
Specify one #1613 POD Activation feature for each additional standby
processor activated (maximum of eight). Specify one #1778 TCoD
Enablement feature for each additional standby processor when approaching
the limit of usable on/off processor days.
#2499 4/32-way Processor (POWER4 1.3 GHz) includes:
– Processor Capacity Card (CCIN 7441)
– Processor 0 (CCIN 25D3)
– Processor 1 (CCIN 25D3)
– Processor 2 (CCIN 25D3)
– Processor 4 (CCIN 25D3)
Specify one #1781 TCoD Enablement feature for each additional standby
processor when approaching limit of usable on/off processor days.
Refer to “Table 10: Summary of the iSeries Model 890” on page 103, to find
Processor CPW, Mail and Calendar Users (MCU), 5250 CPW, and to determine
the processor feature code and QPRCFEAT value.
Main storage
The available main storage features are:
#3015 - 8 GB Main Storage Card (inside) (DRAM)
#3016 - 8 GB Main Storage Card (outside) (DRAM)
#3017 - 32 GB Main Storage Card (inside) (DRAM)
#3018 - 32 GB Main Storage Card (outside) (DRAM)
#3020 - 4 GB Main Storage Card (inside) (DRAM)
#3021 - 4 GB Main Storage Card (outside) (DRAM)
#3035 - 16 GB Main Storage Card (inside) (DRAM)
#3036 - 16 GB Main Storage Card (outside) (DRAM)
Note: The capacity on demand (permanent and temporary) capabilities,
including activation, enablement and billing features, are described in
“Capacity on demand” on page 46.
To Next Page
Loading...
Need help?
General