5486Towr.fm Draft Document for Review October 18, 2004
270 IBM Eserver i5 and iSeries System Handbook
#5106 Dual Line Cord - I/O Tower
The #5106 Dual Line Cords - #5079 Tower provides dual line cord capability for a
single unit in a #5079 tower. Two #14XX line cords must be ordered for each
#5106 present when a #5106 is ordered on an initial order of a #5079. No
batteries are shipped, and two 840W power supplies are shipped with this
configuration. When ordering a #5106 as a simple MES against an existing
#5079, one additional #14XX line cord is required to be ordered with each #5106
ordered. Existing batteries are removed, and the 765W power supplies are
removed and replaced with two 840W power supplies.
The marketing configurator defaults a quantity of two #5106s for each #5079
ordered, on a system that has dual line cords on the CEC.
OS/400 V5R1 (with PTFs) or later is required. Refer to Informational APAR
II12950 at:
http://as400service.rochester.ibm.com/supporthome.nsf/document/10000035
IBM marketing configurator users can refer to this Web site for ordering
information:
http://w3-1.ibm.com/sales/systems/portal/_s.155/253
#5088 PCI-X Expansion Unit
The #5088 is an eight-EIA-unit-high “top hat” installed on top of a #5074/#5094
expansion tower, or on top of a #9079 Base I/O Tower or #9094 Base PCI I/O
Enclosure. The #5088 has 14 PCI-X slots for PCI IOPs and IOAs. Disk units and
removable media are not supported by the #5088.
The #5088 has two redundant 575W power supplies and two internal power
connectors that attach to the AC distribution box in the
#5074/#5094/#9079/#9094. The #5074/#5094/#9079 may have one or two line
cords, so the #5088 may or may not have dual line cord capability depending on
the configuration of the #5074, #5094 or #9079. The #9094 has dual line cord
included.
If the #5088 is ordered together with a #5094/#9094, the #5094/#9094 ships with
the #5088 installed. The #5088 may also be ordered for field install on an existing
#5074/#5094/#9094. The #5088 may not be installed on a #5294 1.8m I/O Tower
or #8094 Optional 1.8 M I/O Rack.
PCI IOAs are supported by feature #2843/#2844 PCI IOPs, feature #2790, #2890
PCI Integrated Netfinity® Servers, feature #2791, #2792, #2799, #2891, #2892,
#2899 PCI Integrated xSeries Servers, and the #4710 PCI Integrated xSeries
To Next Page
Loading...
Need help?
General