iSeries Model 550 127
Draft Document for Review October 18, 2004 5486m550.fm
bracket attached to the top of the system. The bottom bay in a deskside
configuration is left empty and is covered by a plate insert.
Two serial ports and two USB 2.0 ports
These ports are not usable by i5/OS.
Two 1000/100/10 Mb Ethernet ports
These ports are not usable for a local area network (LAN) console.
Base Service Processor (CCIN 28D7) (plugs in slot P1-C7)
Two Hardware Management Console (HMC) ports and two SPCN ports
Two high-speed link (HSL)-2/RIO-G ports
#9844 Base PCI IOP (plugs in slot P1-C1)
Provides support for Peripheral Component Interconnect (PCI) slot P1-C2
only.
Required features
The required features for the 550 system unit include:
Specific combinations of the Processor feature, Edition feature, and Server
feature are allowed as shown in the following table.
Edition content varies by processor and server features selected. For more
information, see “iSeries Editions” on page 58.
Processor Server
feature
Edition feature Software
group
Processor feature
code or
QPRCFEAT value
#8958
(3000/12000 CPW)
#0915 #7462 Standard P20 7462
#7463 Enterprise P20 7463
#7530 Domino P20 7650
#7558 Solution P20
Note: The Standard and Enterprise Editions for the #8958 processor
provide limited and maximum 5250 CPW respectively for 5250 OLTP
workloads.
To Next Page
Loading...
Need help?
General