5486IOA.fm Draft Document for Review October 18, 2004
350 IBM Eserver i5 and iSeries System Handbook
7207 Model 330 External SLR60 Tape Drive
7210 Model 330
7210 Model 020 CD-ROM Bridge Box
7210 Model 025 DVD-RAM drive
7329 Model 308 SLR100 ¼-inch Tape Autoloader
7208 Model 345 60 GB External 8mm Tape Drive
One 7210 Model 025 and one 7210 Model 025: The two devices are
daisy-chained).
One 7210 Model 025 and one 7210 Model 020: The two devices are daisy
chained with the 7210-025 physically connected first. No #0120 attachment
specify code is required for the 7210-020.
One 7207 Model 122 and one 7210 Model 020: The two devices are daisy
chained with the 7207-122 physically connected first. No #0120 attachment
specify code is required for the 7210-020.
One 7207 Model 122 and one 7210 Model 025: The two devices are daisy
chained with the 7207-122 physically connected first.
One 7208-345 and one 7210-020: The two devices are daisy chained with the
7208-345 physically connected first. No #0120 attachment specify code is
required for the 7210-020.
One 7208-345 and one 7210-025: The two devices are daisy chained with the
7208-345 physically connected first.
The #0120 7210-020 Attachment Specify: This is required for each 7210
Model 020 CD-ROM Bridge Box.
The 7210-020 External CD-ROM Drive is to be connected directly (not daisy
chained) to the system through a #2768 PCI Magnetic Media Controller.
The #0162 Extended Single Ended Attach Specify is required when these
devices are directly attached (not second on a daisy-chained string) to an iSeries
server via a #2768 PCI Magnetic Media Controller:
7329 Model 308 SLR100 ¼-inch Tape Autoloader
7210-025 External DVD- RAM Drive
The #2768 PCI Magnetic Media Controller is hot pluggable.
Note: If the 7210-020 is to be daisy chained with another external device, the
#0120 specify code must not be present.
Note: If either of the previous devices is daisy chained from another device,
the #0162 specify code must not be present.
To Next Page
Loading...
Need help?
General