Icom IC-7700 User Manual

9-8
■ Tone scan
The transceiver can detect subaudible tones in a
received signal. By monitoring a signal that is being
transmitted on a repeater input frequency, you can
determine the tone frequency required to access the
repeater.
q Set the desired frequency or memory channel to
be checked for a tone frequency.
w Push
AM/FM
several times to select FM mode.
e Hold down [TONE]
(MF6) for 1 second to enter tone
frequency screen.
r Push [Y]
F-1
or [Z]
F-2
to check the repeater
tone frequency or tone squelch frequency, respec-
tively.
t Push [T-SCAN]
F-6
to start the tone scan.
 •“SCAN”blinkswhilescanning.
y When a matching tone frequency is detected, the
tone scan pauses.
 •Thetonefrequencyissettemporarilyonamemory
channel. Program the memory channel to store the
tone frequency permanently.
 •Thedecodedtonefrequencyisusedfortherepeater
tone frequency or tone squelch frequency.
u To stop the scan, push [T-SCAN]
F-6
.
 •Holddown[DEF]
F-4
for 1 second to select the default
frequency.
i Push
EXIT/SET
toexittonefrequencyscreen.
EXIT/SET
F-1
∫
F-2
√
F-4 F-6
T-SCAN
DEF
TONE
9
SCANS

Icom IC-7700 Specifications

General

Brand	Icom
Model	IC-7700
Category	Transceiver
Language	English