Icom IC-7700 User Manual

3-7
D Selecting 1 Hz step
A minimum tuning step of 1 Hz can be used for fine
tuning.
q Push [TS] to turn the quick tuning function OFF.
w Hold down [TS] for 1 second to turn the 1 Hz tun-
ing step ON or OFF.
3
BASIC OPERATIONS
EXIT/SET
F-5
OTHERS
F-7
SET
F-1
∫
F-2
√
D Auto tuning step function
When rotating the main dial rapidly, the tuning speed
accelerates automatically as selected.
q Push
EXIT/SET
several times to close a multi-func-
tion screen, if necessary.
w Push [SET]
F-7
to select set mode menu screen.
 •Holdingdown
EXIT/SET
for 1 second also selects set
mode menu screen.
e Push [OTHERS]
F-5
to enter Others set mode.
r Push [Y]
F-1
or [Z]
F-2
to select “MAIN DIAL
Auto TS.”
t Rotate the main dial to select the desired condition
from HIGH, LOW and OFF.
 •HIGH:Approximately 5timesfaster whenthe
tuning step is set to 1 kHz or smaller
steps;approximately2timesfasterwhen
the tuning step is set to 5 kHz or larger
steps.
 •LOW:Approximately2timesfaster
 •OFF :AutotuningstepisturnedOFF.
y Push
EXIT/SET
toexitthesetmode.
1Hz step indicator

Icom IC-7700 Specifications

General

Brand	Icom
Model	IC-7700
Category	Transceiver
Language	English