Icom IC-7700 User Manual

4-32
■ Repeater operation
A repeater retransmits a received signal on a differ-
ent frequency. When using a repeater, the transmit
frequency is shifted from the receive frequency by an
offset frequency. A repeater can be accessed using
split frequency operation with the transmit frequency
shifted to the repeater's receive frequency.
For accessing a repeater which requires an access
tone, set the tone frequency in tone frequency set
mode as described below.
q First, set the frequency offsets for HF and 50 MHz
band, then turn ON the quick split function in Oth-
ers set mode. (p. 12-13)
w Push
V/M
toselectVFOmode.
e Push the desired band key.
r Push
AM/FM
several times to select FM mode.
t Set the receive frequency (repeater output fre-
quency).
y Hold down
SPLIT
for 1 second to start repeater
operation.
 •RepeatertoneisturnedONautomatically.
 •[SPLIT]indicatorlightsand“
SPLIT
” appears on the
LCD.
 •Shiftedtransmitfrequencyand“TX”appearinthesub
band.
 •Thetransmitfrequencycanbemonitoredwhilepush-
ing [XFC].
u Hold down [PTT] to transmit; release [PTT] to re-
ceive.
iToreturntosimplex,push
SPLIT
momentarily.
[SPLIT] indicator
[XFC]
Main dial
Band keys
V/M
AM/FM
SPLIT
4
RECEIVE AND TRANSMIT

Icom IC-7700 Specifications

General

Brand	Icom
Model	IC-7700
Category	Transceiver
Language	English