Icom IC-7700 User Manual

12-15
12
SET MODE
SPEECH S-Level ON
The IC-7700 speech processor can announce
frequency, mode and signal level. Signal level an-
nouncement can be deactivated if desired.
(default: ON)
When “OFF” is selected, the signal level is not an-
nounced.
SPEECH [MODE] Switch OFF
Selects the operating mode speech capability when
a mode switch is pushed; ON or OFF. (default: OFF)
When “ON” is selected, the selected operating mode
is announced when a mode switch is pushed.
Memopad Numbers 5
Sets the number of memo pad channels available. 5
or 10 memo pads can be selected. (default: 5)
MAIN DIAL Auto TS HIGH
Sets the auto tuning step function for the main dial.
When rotating the main dial rapidly, the tuning step
automatically changes several times as selected.
There are 2 type of auto tuning steps: HIGH (Fast-
est) and LOW (Faster). (default: HIGH)
•HIGH :AutotuningstepisturnedON.Fastest
tuning step during rapid rotation. (default)
•LOW :AutotuningstepisturnedON.Fastertun-
ing step during rapid rotation.
•OFF :AutotuningstepisturnedOFF.
MIC Up/Down Speed HIGH
Sets the rate at which frequencies are scanned
when the microphone [UP]/[DN] switches are held
down. HIGH or LOW can be selected.
•HIGH :Highspeed(default:50tuningsteps/sec-
ond)
•LOW :Lowspeed(25tuningsteps/second)
Quick RIT/∂TX Clear OFF
Selects the RIT/∂TX frequency clearing instruction
with the
CLEAR
switch.
•ON :Cl ea rs t he  R IT /∂ TX f re qu ency w he n
CLEAR
is pushed momentarily.
•OFF:C lears t he  R IT /∂ TX f re qu ency w he n
CLEAR
is held down for 1 second. (default)
[NOTCH] Switch (SSB) Auto/Manual
Selects notch functions for SSB mode operation
from Auto, Manual and Auto/Manual.
•Auto :Onlytheautonotchcanbeused.
•Manual :Onlythemanualnotchcanbeused.
•Auto/Manual:Boththeautoandmanualnotchcan
be used. (default)
[NOTCH] Switch (AM) Auto/Manual
Selects notch functions for AM mode operation from
Auto, Manual and Auto/Manual.
•Auto :Onlytheautonotchcanbeused.
•Manual :Onlythemanualnotchcanbeused.
•Auto/Manual:Boththeautoandmanualnotchcan
be used. (default)
DIGI–SEL VR Operation DIGI–SEL
Selects [DIGI-SEL] control function from DIGI-SEL
and APF.
•DIGI-SEL :[DIGI-SEL]controlfunctionsasthedig-
ital selector operation. (default)
•APF :[DIGI-SEL]control functionsasthe
audio peak filter adjustment.
■ Other set mode (continued)

Icom IC-7700 Specifications

General

Brand	Icom
Model	IC-7700
Category	Transceiver
Language	English