6-16
6
SCOPE OPERATION
Audio scope screen (Continued)
D Audio scope set mode
This set mode is used to set the FFT scope waveform
type, color, Waterfall display and oscilloscope wave-
form color.
Display the Audio scope screen, then hold down q
[SET](F) for 1 second.
AUDIO [F-6] SET [F-7]
• The Audio scope set screen is displayed.
Push [ w p](F) or [q](F) to select the desired item.
• Push [t u] to select the contents for various items.
Rotate [MAIN DIAL] to select the option or set the e
level.
• Hold down [DEF](F) for 1 second to select the default
option or level.
r Push [EXIT/SET].
• Exits the Set screen.
[EXIT/SET] [MAIN DIAL](F) Function keys
• Audio scope set screen
FFT Scope Waveform Type
(Default: Fill)
Select the type of waveform for the FFT scope.
• Fill: The waveform is drawn by only the color.
• Line: The waveform is drawn by only outline.
FFT Scope Waveform Color
(Default: (R) 51 (G) 153 (B) 255)
Set the waveform color for the FFT scope.
• The color is set in RGB format.
• Push [t u](F) to select R (Red), G (Green) and B
(Blue). Rotate [MAIN DIAL] to adjust the ratio from
0 to 255.
• The color is displayed in the box beside the RGB
scale.
FFT Scope Waterfall Display
(Default: ON)
Turn the Waterfall display ON or OFF.
• OFF: Turns OFF the Waterfall display.
• ON: Turns ON the Waterfall display.
Oscilloscope Waveform Color
(Default: (R) 0 (G) 255 (B) 0)
Set the waveform color for the Oscilloscope.
• The color is set in the RGB format.
• Push [t u](F) to select R (Red), G (Green) and B
(Blue). Rotate [MAIN DIAL] to adjust the ratio from
0 to 255.
• The color is displayed in the box beside the RGB
scale.
To Next Page
Loading...
Need help?
General
