Operating RTTY (FSK) (Continued)
D
RTTY decode set mode
This Set mode is used to set the decode USOS func-
tion, time stamp setting, and other RTTY settings.
q
Display the RTTY decode screen, then push
[<MENU1>](F).
DECODE [F-3] <MENU1> [F-1] Displays <MENU2>
• The function menu changes to Menu 2.
Push [SET](F). w
• The RTTY decode set screen is displayed.
Push [ e p](F) or [q](F) to select the desired item.
Rotate [MAIN DIAL] to select the desired setting. r
• Hold down [DEF](F) for 1 second to select the default
setting.
• Push [t u](F) to select the set contents for some
items.
Push [EXIT/SET]. t
• Exits the Set screen.
RTTY FFT Scope Averaging (Default: OFF)
Sets the FFT scope waveform averaging function from
2 to 4 or OFF.
Recommendation!
Use the default or smaller number FFT scope wave-
form setting for tuning.
RTTY FFT Scope Waveform Color
(Default: (R) 51 (G) 153 (B) 255)
Sets the color of the FFT scope waveform.
• The color is set in the RGB format.
• Push [
t u](F)
to select R (Red), G (Green) and B
(Blue). Rotate [MAIN DIAL] to adjust the ratio from
0 to 255.
• The color is displayed in the box beside the RGB
scale.
RTTY Decode USOS (Default: ON)
Turns the letter code decoding capability ON or OFF
after receiving a “space.”
(USOS: UnShift On Space function)
• ON: Decodes as a letter code.
• OFF: Decodes as a character code.
RTTY Decode New Line Code
(Default: CR,LF,CR+LF)
Selects the internal RTTY decoder new line code.
CR: Carriage Return, LF: Line Feed
• CR,LF,CR+LF: Makes new line with any codes.
• CR+LF: Makes new line with CR+LF code
only.
RTTY Diddle (Default: BLANK)
Selects the diddle status.
• BLANK: Transmits blank code during no code trans-
mission.
• LTRS: Transmits letter code during no code trans-
mission.
• OFF: Turns the diddle function OFF.
RTTY TX USOS (Default: ON)
Explicitly inserts the FIGS character, even though it is
not required by the receiving station.
• ON: Inserts FIGS.
• OFF: Does not insert FIGS.
• RTTY decode set screen
[EXIT/SET] [MAIN DIAL](F) Function keys
• Fucntion menu (MENU2)
To Next Page
Loading...
Need help?
General
