Saving with a different le name
• Setting save screen
• When entering “JA3YUA”
• When changing a le name to “JA3YUA”
• Conrmation window
You can change the file name when saving onto a card
or flash drive.
The file name can be up to 15 characters.
Example: Changing a file name to JA3YUA.
Displays the q Setting save screen.
SET [F-7] SD/USB [F-7] SAVE [F-2]
Push [SD/USB](F). w
• Pushing [SD/USB](F) toggles the le save destination
between the card and the flash drive.
Push [NAME](F). e
• Enters the le name entry mode.
Push [DEL](F). r
• Deletes the pre-entered name.
Edit the desired characters by rotating [MAIN DIAL] t
or enter numbers by pushing keypad keys.
q When [ABC]() is selected, rotate [MAIN DIAL]
to select “J.”
w Push [u](F) to move the cursor.
e Rotate [MAIN DIAL] to select “A.”
r Push [u](F) to move the cursor.
t Push [123](), and then rotate [MAIN DIAL] to
select “3.”
y Push [u](F) to move the cursor.
u Push [ABC](), and then rotate [MAIN DIAL] to
select “Y.”
i Push [u](F) to move the cursor.
o Push [ABC](), and then rotate [MAIN DIAL] to
select “U.”
!0 Push [u](F) to move the cursor.
!1 Rotate [MAIN DIAL] to select “A.”
• You can use a keyboard connected to the transceiver to
enter text or numbers.
Push [EXIT/SET]. y
• Returns to the Setting save screen.
Push [SAVE](F). u
• Opens the conrmation window.
• To cancel loading, push [CANCEL](F).
Push [OK](F). i
• Saves the data settings to the selected destination.
• While saving to the card, the indicator to the left of the
[SD CARD] slot lights.
• While saving to the ash drive, the indicator to the right
of the [SD CARD] slot lights.
• You can change the content to be saved in the Save set
screen (p. 10-4).
( SET [F-7] > SD/USB [F-7] > SAVE [F-2] >
SAVE Contents)
• After saving, returns to the SD/USB-Memory set
screen.
File name entry mode
Change the file name
To Next Page
Loading...
Need help?
General
