Icom IC-7851 User Manual

4-7
4
BASIC OPERATION

Setting the frequency
The transceiver has several setting methods for conve-
nient frequency setting.
D Tuning with [DIAL]
Select the desired band with the band keys. q
Rotate [MAIN DIAL] to set the desired frequency in w
the Main band.
Rotate [SUB DIAL] to set the desired frequency in
the Sub band.
 CONVENIENT!
The [SUB DIAL] is always ready to tune the Sub band.
The Sub dial allows you to quickly tune the Sub band
without changing from Main to Sub.
[MAIN DIAL] [SUB DIAL]
Band keys
D About the Quick tuning step
The operating frequency can be changed in kHz steps
for quick tuning. The Quick tuning function can be inde-
pendently set for the Main and Sub bands.
• Tuning
Push [TS]. q
• “” is displayed and the Quick tuning function is turned
ON.
Rotate [MAIN DIAL]. w
• The frequency changes in kHz steps.
Push [TS] again. e
• “” disappears and the Quick tuning function is turned
OFF.
• Selecting the desired “kHz” step
q Push [TS].
• “” is displayed and the Quick tuning function is turned
ON.
Hold down [TS] for 1 second. w
• The TS screen is displayed.
Push the desired Mode key. e
• The operating mode is selected.
Rotate [MAIN DIAL] to select a tuning step. r
• Selectable tuning steps:
0.1, 1, 5, 9, 10, 12.5, 20, or 25 kHz
• Push [DEF](F) for 1 second to return the tuning step to
the default setting.
Repeat steps t e and r to select Quick tuning steps
for other modes, if desired.
Push [EXIT/SET] to exit the setting display. y
The TS screen can be entered from the Main or Sub
band.
The selected tuning step is used for both the Main
and Sub bands.
• TS screen
TS icon
TS icon
Mode keys
[MAIN DIAL]
[EXIT/SET] [TS] MAIN, SUB
[SUB DIAL]

Icom IC-7851 Specifications

General

Brand	Icom
Model	IC-7851
Category	Transceiver
Language	English