Scan types
• The scan functions can be used on the Main band
only.
• You can scan while operating on a frequency using
the Dualwatch or Split functions.
PROGRAMMED SCAN
Repeatedly scans between two Scan Edge frequencies
(Scan Edge memory channels P1 and P2).
This scan works in the VFO mode.
SELECT MEMORY SCAN
Repeatedly scans all or one of 3 select memory channels.
∂F SCAN
Repeatedly scans within the
∂F span area.
This scan works in the Memory mode.This scan works in the Memory mode.
This scan works in both the VFO and Memory modes.
Scan
Scan edge
P1 or P2
Scan edge
P2 or P1
Jump
MEMORY SCAN
Repeatedly scans all programmed memory channels.
Ch 1
�
1
Ch 5
�1
Ch 2
�
2
Ch 3
�1
Ch 4
Ch 6
�
3
Ch 7
�1
Ch 99
�1
Ch 1
�
1
Ch 5
�1
Ch 2
�
2
Ch 3
�1
Ch 4
Ch 6
�
3
Ch 7
�1
Ch 99
�1
Blank channel Blank channel
ScanScan
–∂
F frequency +∂F frequency
Start frequency
Jump
*“�1,” “�2” and “�3” show that the channel
is specified as a select memory.
*“�1,” “�2” and “�3” show that the channel
is specified as a select memory.
To Next Page
Loading...
Need help?
General
