9-9
9
VOICE RECORDER FUNCTIONS
To transmit a message using the Voice memory, first
record the desired message as described below.
You can record up to 8 digital voice messages of up to
200 seconds each, for transmission.
D Recording
The Multi-function screens are OFF.
Push [VOICE](F). q
• The Voice memory screen is displayed.
Push [MIC REC](F). w
• The Voice MIC-Record screen is displayed.
Push [ e Y](F) or [Z](F) to select the desired Voice
memory channel “T1” to “T8.”
Hold down [REC](F) for 1 second to start record- r
ing.
• “
” appears.
Speak into the microphone without holding down t
[PTT].
• While speaking into the microphone at your normal
voice level, adjust the [MIC] control so that the “MIC-
REC LEVEL” meter reads 100%.
• While recording, the timer counts up the remaining time
period. You can record up to 200 seconds that is total of
“T1” to “T8” voice memories.
• Previously recorded contents are overwritten.
Push [REC](F) to stop recording. y
Push [EXIT/SET] several times. u
• Exits the Voice memory screen.
Recording or playing back a TX message
[MIC]
[EXIT/SET](F) Function keys
[EXIT/SET](F) Function keys
• While playing back
• While recording
Appears Adjust [MIC] control so that this
indicator reads 100%.
Appears
D Playing back
Do the steps q q and w as described above to dis-
play the Voice MIC-Record screen.
Push [ w Y](F) or [Z](F) to select the desired Voice
memory channel “T1” to “T8” to playback.
Push [PLAY](F) to start playback. e
• “
” appears and the timer counts down.
• Playback is automatically terminated when all of the re-
corded contents in the channel are played back.
•
To pause while playing back, push [Y](F), [Z](F), [PLAY](F),
[REC](F), [NAME](F), [CLR](F), or [EXIT/SET].
• To clear the recorded contents of the selected Voice
memory channel, hold down [CLR](F) for 1 second.
Push [EXIT/SET] several times. r
• Exits the Voice MIC-Record screen.
To Next Page
Loading...
Need help?
General
