8
MDC 1200 SYSTEM OPERATION
8-5
Transmitting a call (Continued)
An MDC Sel Call enables you to make a call to a
specic station, or to a particular group. Other MDC
1200 system transceivers on the channel do not
receive a Sel Call that does not include the matching
station or group ID.
<Key operation>
1. Push [Call Menu] to display the Call Menu screen.
2. Push [Up] or [Down] to select a station or group
ID, then push [OK].
3. Push [Up] or [Down] to select “Sel Call.”
4. Hold down [PTT] to transmit an MDC Sel Call to
the selected station.
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD type
(Menu > Signaling/Call > Call Menu)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select “Signaling/Call,”
then
push [OK].
3. Push [Up] or [Down] to select “Call Menu,” then
push [OK].
4. Push [Up] or [Down] to select a station or group
ID, then push [OK].
5. Push [Up] or [Down] to select “Sel Call.”
6. Hold down [PTT] to transmit an MDC Sel Call to
the selected station.
• “ ” is displayed while transmitting the Sel Call.
D Transmitting an MDC Selective Call (Sel Call)
To Next Page
Loading...
Need help?
General
