9
ABOUT THE microSD CARD
9-5
Loading the saved data les onto a microSD card
You can load the Memory channels and transceiver’s
settings from the card to a transceiver.
This function is convenient when:
• Setting up from a PC
• Copying the data to another transceiver to operate
with the same data.
NOTE: When 2 or more data les are saved in the
card, the latest le will be loaded.
TIP: Backing up the current data is recommended
before loading other data into the transceiver.
(p. 9-7)
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD types
(Menu > SD Card > Load Setting <- SD)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select “SD Card,” then
push [OK].
3. Push [Up] or [Down] to select “Load Setting <-
SD,” then
push [OK].
• “Update Ready Execute?” is displayed.
4. Push [Left] or [Right] to select “Yes,” then push
[OK].
• Starts the le check.
L While checking the le, “Pre Processing..” and a
progress bar are displayed.
5. After checking, the file loading starts.
• While loading, “Load Setting..” and a progress bar are
displayed.
6. After loading ends, the transceiver automatically
restarts.
To Next Page
Loading...
Need help?
General
