14
OPTIONS
14-5
MB-136 belt clip (for the Portable type transceiver) (Continued)
D Detaching
1. Turn the transceiver upsidedown in the direction
of the arrow and pull it out of the belt clip.
2. Detach the battery pack. (p. 1-3)
3. Pinch the tab on the base clip (q), and then slide
the clip in the direction of the arrow (w).
q
w
Battery
pack
BE CAREFUL! Don’t break your ngernail.
NOTE: HOLD THE TRANSCEIVER TIGHTLY WHEN
INSERTING OR REMOVING THE TRANSCEIVER
FROM THE BELT CLIP. Otherwise the transceiver
may not be properly attached to the holder or swivel,
if the transceiver has been accidentally dropped and
the base clip is scratched or damaged.
To Next Page
Loading...
Need help?
General
