5
SCAN OPERATION
5-4
Selecting a Scan list
You can select a Scan list to be scanned.
Channels included in the selected Scan list are
scanned during a scan.
When selecting a zone type Scan list, the channels
that are in the same zone as the Scan start channel
will be scanned.
<Key operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD type
1. Hold down [Scan Start/Stop] for 1 second to
display the “Scan List” screen.
2. Push [Up] or [Down] to select a list, then
push
[OK].
<Menu operation>
Portable: For the Ten-key and the Simple key types
Mobile: For the LCD type
(Menu > Channel/Scan > Scan List)
1. Push [Menu] to display the Menu screen.
2. Push [Left] or [Right] to select “Channel/Scan,”
then
push [OK].
3. Push [Up] or [Down] to select “Scan List,” then
push [OK].
• Displays the “Scan List” screen.
4. Push [Up] or [Down] to select a list, then push
[OK].
5. Hold down [Back] for 1 second to return to the
standby screen.
To Next Page
Loading...
Need help?
General
