11
Bluetooth
®
OPERATION
11-8
Headset settings
D About the VS-3 headset
You can set the detailed settings of the optional VS-3
Bluetooth
®
headset.
• Key Beep (p. 6-14)
(Menu > Bluetooth > Key Beep (VS-3))
Set a beep to sound when you push [PLAY], [FWD] or
[RWD] on the VS-3. This setting is different from the
transceiver’s beep setting. When both settings are set
to “ON,” the beeps sound on the transceiver and the
headset.
• Power Save (p. 6-14)
(Menu > Bluetooth > P.Save (VS-3))
The Power Save function temporarily disconnects
the Bluetooth
®
connection if no communication or
operation is performed for 120 seconds, to prolong the
VS-3’s battery life.
• PTT Beep (p. 6-14)
(Menu > Bluetooth > PTT Beep (VS-3))
Set a beep to sound when you push [PTT] on the VS-
3. This setting is different from the transceiver’s beep
setting. When both settings are set to “ON,” the beeps
sound on the transceiver and the headset.
• One-touch PTT (p. 6-14)
(Menu > Bluetooth > One-touch PTT)
The One-Touch PTT function enables you to toggle
between transmit and receive by pushing [PTT].
D AF Output
(Menu > Bluetooth > BT Audio Setting)
You can set the audio output device when a
Bluetooth
®
headset is connected.
If the “BT Audio Setting” item is set to “BT & SP,” you
can hear audio from both a connected Bluetooth
®
headset and the transceiver’s speaker.
See page 6-14 for details.
To Next Page
Loading...
Need help?
General
