Icom ID-800H User Manual

50
8
PRIORITY WATCH
8
■ Priority watch operation
q Select VFO mode; then, set an operating frequency.
w Set the watching channel(s).
For memory channel watch:
Select the desired memory channel.
For memory scan watch:
Select memory mode; then, push [V/MHz•SCAN] for
1 sec. to start memory scan.
For call channel watch:
Select the desired call channel by pushing
[M/CALL•PRIO] once or twice, then push [BAND•MODE].
e Push [M/CALL•PRIO] for 1 sec. to start the watch.
• The transceiver checks the memory or call channel every 5 sec.
• The watch resumes according to the selected scan resume con-
dition. (p. 48)
• While the watch is pausing, pushing [M/CALL•PRIO] resumes
the watch manually.
r Push [M/CALL•PRIO] for 1 sec. to stop the watch.
z Select VFO mode; then, set the desired fre-
quency.
x Set the watching channel(s).
For memory channel watch:
Push [MR/CALL] then [
YY
] or [
ZZ
] to select the
desired memory channel.
For memory scan watch:
Push [MR/CALL], then push [
SCAN 2(T-SCAN)]
to start the memory scan.
For call channel watch:
Push [MR/CALL] for 1 sec. then push [BAND] to
select the call channel.
c Push [
PRIO 3(PTT-M)] to start the watch.
• The transceiver checks the memory or call channel
every 5 sec.
• The watch resumes according to the selected scan re-
sume condition. (p. 48)
• To resume the watch manually when paused, push
[ PRIO 3(PTT-M)] or [ CLR A(MW)].
v To stop the watch, push [ CLR A(MW)] once (or
twice while watch is paused).
PRIO
3
[M/CALL•PRIO]
“PRIO” appears
ID-800H_1.qxd 2007.06.14 3:09 PM Page 50

Icom ID-800H Specifications

General

Brand	Icom
Model	ID-800H
Category	Transceiver
Language	English