60
11
DIGITAL MODE OPERATION
10
11
■ Digital mode operation
The ID-800H can be operated for digital voice mode and low-
speed data operation for both transmit and receive. It can
also be connected to a GPS receiver
(compatible with an RS-
232 output/NMEA format/4800 bps) and transmit/receive position
data.
NOTE: The DTMF operations
(both DTMF memory and using
with the HM-133) are not available in digital mode.
■ Call sign programming
Four types of call sign memories are available for your own
call sign “MyCALL,” other station call sign “UrCALL,” repeater
call sign “RPT1 C” and “RPT2 C.” “MyCALL” can store up to
6, “UrCALL” can store up to 99 and “RPT1/2 C” can store up
to 54 call signs, and each call sign can be programmed with
up to 8 characters.
ID-800H_1.qxd 2007.06.14 3:09 PM Page 60
To Next Page
Loading...
Need help?
General
