65
11
DIGITAL MODE OPERATION
■ Digital voice mode operation
qSet the desired frequency in VFO mode. (pgs. 11, 12)
• Select output power, if desired. (p. 19)
wSelect DV mode. (p. 15)
e
Push [SET•LOCK] to enter the call sign set mode.
• Rotate [DIAL] to select “CALLS,” if necessary.
r
Push [SET•LOCK] or [S.MW•MW] several times until “My-
CALL” appears.
tRotate [DIAL] to select the desired your own call sign
channel
(if you have programmed several call signs) then push
[SET•LOCK]
for 1 sec. to set the call sign and return “My-
CALL.”
•“M” indication stops blinking.
y
Push [SET•LOCK] once to select “UrCALL.”
uSelect the desired call sign as “When sending a CQ (p. 66)”
or “When calling the desired station
(p. 67).”
iPush and hold [PTT] to transmit and speak into the micro-
phone at normal voice level.
• Transmit indicator appears and the RF meter shows the output
power.
oRelease [PTT] to return to receive.
• The other station call sign will be received.
• Received call signs can be stored into the received call record
automatically. See page 75 for details.
z Set the desired frequency in VFO mode. (pgs. 11,
12)
x Select DV mode. (p. 15)
c Push [
SET
B(D-OFF)] to enter call sign set mode.
• Push [
YY
] or [
ZZ
] to select “CALLS,” if necessary.
v Push [
SET
B(D-OFF)] or [
ENT
C(T-OFF)] several
times until “MyCALL” appears.
b
Push [
YY
] or [
ZZ
] to select the desired own call
sign channel, if you have programmed several
call signs, then push [
SET
B(D-OFF)] for 1 sec. to
set the call sign and return “MyCALL.”
•“M” indication stops blinking.
n
Push [
SET
B(D-OFF)] once to select “UrCALL.”
m Select the desired call sign as “When sending a
CQ
(p. 66)” or “When calling the desired station
(p. 67).”
, Push and hold [PTT] to transmit and speak into
the microphone at normal voice level.
• Transmit indication appears and the RF meter shows
the output power.
. Release [PTT] to return to receive.
✔
For your information
See page 75 for the set call sign confirmation.
ID-800H_1.qxd 2007.06.14 3:09 PM Page 65
To Next Page
Loading...
Need help?
General
