6 Parameter Description
-
209
-
Group F6: Basic elevator parameters
Function
Code
Name Setting Range Default Unit Property
F6-00 F6-01 to 40 9 -
★
F6-01
elevator
1 to F6-00 1 -
★
determined by the number of actually installed leveling plates.
Function
Code
Name Setting Range Default Unit Property
F6-02 F6-01 to F6-00 1 -
★
When the idle time of the elevator exceeds the value set in F9-00, the elevator returns
Function
Code
Name Setting Range Default Unit Property
F6-03 F6-01 to F6-00 1 -
★
Function
Code
Name Setting Range Default Unit Property
F6-04 F6-01 to F6-00 1 -
★
When the elevator enters the elevator lock state, the elevator will return to this
elevator lock switch is turned on or the set elevator lock time is reached, the elevator
cancels all registered hall calls and responds to all registered car calls, returns to the
after the door closes, the elevator cancels hall call display.
Function
Code
Name Setting Range Default Unit Property
F6-05 65535 -
★
F6-06 65535 -
★
F6-35 65535 -
★