– 120 –
8-12.
Active-presser multi-layered section detection function (* excluding the F type model)
8-12-1. Multi-layered section detection function
The multi-layered portion detection function detects a multi-layered portion of material. With this func-
tion, the sewing machine automatically changes over the sewing parameter to the one for sewing
multi-layered portion of material and performs sewing. The multi-layered section detection setting can
be stored in memory on a pattern-by-pattern basis.
Detectable material thickness : Max.10 mm
Detection resolution : 0.1mm
feed dog height. Stable detection, therefore, cannot be carried out. It is not possible to detect two or
function or the polygonal-shape stitching function by means of the hand switch should be used.
[In order to detect a multi-layered sec-
tion]
1. Select enable/disable of the
multi-layered section detection func-
tion.
1) Press
❶
.
The "sewing data edit screen" is dis-
played.
<Sewing screen>
2) Press to proceed to the next
page. Then, press
❷
.
The "Multi-layered portion sewing pa-
rameter list screen" is displayed.
If the presser foot rests on a multi-layered part of material when turning the power ON, the
multi-layered part detection may fail to be turned ON.
<Sewing data edit screen>
❶
❷
To Next Page
Loading...
Need help?
General
