– 133 –
9-2. Setting up the polygonal-shape stitching
<Example of pattern>
Step5
Step1
Step2 Step3
Step4
9-2-1. Editing a polygonal-shape stitching pattern
①
Displaying the sewing screen (maintenance personnel mode) for the polygonal-shape
stitching pattern
Press
❶
on the sewing screen under
the maintenance personnel mode.
The "polygonal-shape stitching step edit
screen" is displayed.
<Sewing screen (Maintenance personnel mode)>
This section describes how to change the number of steps and step-by-step conditions of a polygo-
nal-shape stitching pattern.
❶
A polygonal-shape stitching pattern consists of
as many as 30 steps of straight stitching. Sewing
condition can be separately set for each step.
* This operation is to be carried out under
the maintenance personnel mode.
To Next Page
Loading...
Need help?
General
