– 63 –
5-2-7. Teaching function
This is the function that enables entry of the number of stitches of a sewing pattern using the actual
number of stitches sewn.
This function screen can be displayed from the sewing data edit screen.
* The teaching function can be used in the case the "constant-dimension sewing" or "polygo-
nal-shape stitching" is selected.
Press
❶
on the sewing data list screen.
Then, the number of stitches input screen is
displayed.
①
Turning ON the teaching function
Press
❷
to turn ON the teaching
function.
②
Starting teaching
The input value is set to 0 (zero). Then,
depress the pedal to perform sewing
until the desired position is reached.
The teaching function counts the
number of stitches sewn by the sewing
machine during the aforementioned
operation.
(1) How to set (constant-dimension sewing)
<Sewing screen (constant-dimension sewing) (Maintenance
personnel mode)>
<Number of stitches input screen>
<Sewing screen (polygonal-shape stitching) (Maintenance
personnel mode)>
❶
❷
❶
③
Conrming the data entered under the teaching mode
The screen returns to the "Sewing screen (constant dimension sewing) (Maintenance personnel
mode)".
To Next Page
Loading...
Need help?
General
