– 168 –
9-10-2. How to assign a function to a key
①
Displaying the key customization mode list screen
1) Keep
❶
held pressed for three
second.
The "mode screen" is displayed.
2) Select the "12. Key customization set-
ting".
The "key customization mode list
screen" is displayed.
②
Setting the key customization
<Key customization mode list screen>
<Mode screen>
1) Select "1. Pattern sewing under oper-
ator mode". Then, "key customization
assignment screen (operator mode)" is
displayed.
2) Select "2. Pattern sewing under service
mode". Then, "key customization as-
signment screen (Maintenance person-
nel mode)" is displayed.
3) Select "3. Cycle sewing". Then, "key
customization assignment screen (Cy-
cle mode)" is displayed.
❶
To Next Page
Loading...
Need help?
General
