– 50 –
<Sewing-end reverse feed stitching edit screen>
5-2-4. Reverse feed stitching (at end) pattern
A stitch shape of reverse feed stitching (at end) is set by following the steps of procedure described
below.
(1) Enabling the reverse feed stitching (at end) pattern
①
Displaying the edit screen for reverse feed stitching (at end)
(2) Changing the number of stitches and pitch of reverse feed stitching (at end) pattern
Keep
❶
held pressed for one sec-
ond. The reverse feed stitching (at end) edit
screen is displayed.
The sewing-end reverse feed stitching pat-
tern can be operated when the sewing-end
reverse feed stitching function is placed in
the ON state( mark is not displayed).
If this function is placed in the OFF state
press the sewing end reverse feed stitch
mark display to en-
able the sewing-end reverse feed stitching
function.
* From the next item number and be-
yond, set the function items in the
same manner as the functions for sew-
ing-start reverse feed stitching. (Refer
to
"5-2-3. Reverse feed stitching (at
start) pattern" p.44
.)
❶
❶
To Next Page
Loading...
Need help?
General
