– 170 –
9-11. Maintenance management function
When the set value for the counter is reached, this function gives a warning on the screen. As many as
1) Keep
❶
held pressed for three
second.
The "mode screen" is displayed.
2) Select "9. Maintenance management
setting".
<Warning counter setting screen>
3) When the counter for which the set val-
ue for warning is selected, the "warning
counter setting screen" is displayed.
4) When
❷
is pressed, the "warn-
ing counter type selection screen" is
displayed.
❶
❸
❷ ❺
❹
To Next Page
Loading...
Need help?
General
