Juniper E Series User Manual

E-series Hardware Guide
148 ! Channelized T3 Modules
Channelized T3 Modules
RIP Yes Yes
SMDS (trunk encapsulation) No No
Subscriber interfaces (static) No No
Subscriber interfaces (dynamic) No No
Transparent bridging No No
VRRP No No
Table 25: Channelized T1 and E1 modules (continued)
Protocol or Application
CT1 Line Module
with CT1 Full I/O Modules
CE1 lIne Modules
with CE1 Full I/O Modules
Table 26: Channelized T3 modules
Protocol or Application
CT3 line Modules
with CT3/T3 I/O Modules
CT3/T3-F0 Line Modules
with CT3/T3 12 I/O Modules
Acceptance of traffic for IP tunnels Yes Yes
APS/MSP No No
AT M N o N o
BERT Yes
(T1 layer)
Yes
BGP Yes Yes
Bridged Ethernet No No
Bridged IP No No
CBF No No
Cisco HDLC Yes Yes
DHCP local server No No
Dynamic interfaces No No
F4 OAM (ATM Administration) No No
FDL (facilities data link) Yes Yes
Frame Relay Yes Yes
IP Yes Yes
IP Multicasting No Yes
IPSec No No
IPv6 No No
IS-IS Yes Yes
LAC Support – access side No No
LAC Support – peer side No No
LNS Support – Internet side No No
LNS Support – peer side No No
Local loopback Yes (with AIS) Yes
MDL (maintenance data link) Yes Yes

Juniper E Series Specifications

General

Brand	Juniper
Model	E Series
Category	Network Router
Language	English