Safety Guidelines ! 27
Chapter 3: Installation Guidelines and Requirements
ERX-310 Power Cord Warnings (AC Model)
WARNING: Do not work on the system or connect or disconnect cables during
lightning activity.
WARNING: Be sure circuit breakers for the power source are in the OFF position
before attaching power cables.
WARNING: Before servicing the E-series router, turn off the power.
WARNING: Remove jewelry (including rings, necklaces, and watches) before
working on equipment that is connected to power lines. Metal objects heat up
when connected to power and ground and can cause serious burns or become
welded to the terminals.
WARNING: Do not insert any metal object, such as a screwdriver, into an open slot
or the backplane. Doing so may cause electric shock and serious burns.
CAUTION: Evaluate the overall loading of the branch circuit before you install any
equipment into a rack.
WARNING: This unit has more than one power-supply cord. Disconnect 2 power
cords BEFORE servicing to avoid electric shock.
Denne enhed har mere end een strømfordelingsledning. Fjern ledning(er) nummer
2 FØR eftersyn for at undgå elektrisk stød.
Waarschuwing! Dit apparaat heeft meerdere netsnoeren. Vermijd elektrische
schok! Verwijder 2 netsnoeren ALVORENS onderhoud te verrichten.
Tässä laitteessa on useampi kuin yksi verkkojohto. Irrottakaa 2 verkkojohtoa
ENNEN huoltoa sähköiskujen välttämiseksi.
Attention: Cet appareil comporte plus d'un cordon d'alimentation. Afin de prévenir
les chocs électriques, débrancher les 2 (donner le nombre de cordons) cordons
d'alimentation AVANT le dépannage.
Dieses Gerät hat mehrere Stromversorgungskabel. Klemmen Sie 2 Stromkabel VOR
der Wartung ab, um einen elektrischen Schlag zu vermeiden.
L'unità ha più di un cavo di alimentazione. Scollegare 2 cavi di alimentazione
PRIMA di usarla, onde evitare scosse elettriche.
Denne enheten har mer enn en nett-tilkobling. 2 nettkabler må frakobles FØR
service for å unngå elektrisk støt.
To Next Page
Loading...
Need help?
General
