Juniper E Series User Manual

Cabling I/O Modules ! 69
Chapter 6: Cabling E-series Routers
Figure 38: I/O module with LC full duplex connectors
SC Duplex Connectors
In accordance with EN60825-1, Safety of Laser Products - Part 1: Equipment Class,
Requirements, and User’s Guide (2001), multimode I/O modules with SC
connectors are defined as follows:
CLASS 1 LED PRODUCT.
In accordance with EN60825-1, Safety of Laser Products - Part 1: Equipment Class,
Requirements, and User’s Guide (2001), single-mode I/O modules with SC
connectors are defined as follows:
CLASS 1 LASER PRODUCT.
Port 0
Port 1
TX
RX
TX
RX
OC3
I/O
g013759
WARNING: Do not look directly into SC-style fiber connectors. The fiber-optic laser
used in single-mode fiber (SMF) meets the regulatory requirements for casual
exposure to the eye; however, looking directly into a laser can cause eye damage.
WARNING: IEC 825, Class 1 laser fiber connectors are for connection only to Class
1 laser devices.

Juniper E Series Specifications

General

Brand	Juniper
Model	E Series
Category	Network Router
Language	English