Inspecting E-series Router Components and Accessories ! 23
Chapter 2: Unpacking and Inspecting E-series Routers
Inspecting E-series Router Components and Accessories
After you remove the equipment from the shipping containers:
! Confirm the contents of each container.
! Inspect all external surfaces and external connectors for visible signs of
damage.
! Inspect all accessories shipped with each unit.
! Document any damage noted during your inspection.
! Confirm that the router has the correct number and type of modules for your
ordered configuration.
If You Detect or Suspect Damage
If you detect or suspect damage to any equipment:
! Contact the shipper responsible for delivery, and formally report the damage.
! Contact your Juniper Networks sales representative or reseller.
Contacting Juniper Networks
Please contact Juniper Networks at 1-888-314-JTAC (within the United States) or
408-745-9500 (from outside the United States), or contact your sales representative
if you have any questions or concerns. See Appendix C, Customer Support, for
complete contact information.
The Next Step
! To familiarize yourself with the electrical, environmental, and other guidelines
and requirements for installing E-series routers, turn to Chapter 3, Installation
Guidelines and Requirements.
! If you are familiar with these guidelines and requirements, turn to Chapter 4,
Installing E-series Routers.
WARNING: Three people are required to install the E-series router in a rack: two to
lift the system into position and one to screw it to the rack.
To Next Page
Loading...
Need help?
General
