Keithley 2600a series User Manual

2600AS-901-01 Rev. B / September 2008 Return to Section Topics 10-3
Series 2600A System SourceMeter® Instruments Reference Manual Section 10: Triggering
Remote triggering overview
There are two programming methods for triggering:
• Using the trigger model.
• Interactive triggering.
Using the trigger model to control the actions of the SMU allows the user to obtain very precise
timing and synchronization between SMUs of a single instrument or between channels of multiple
instruments. To achieve such precise timing, a static trigger configuration must be used. When a
static trigger configuration is not possible, the interactive triggering method can be used to control
the timing and actions of the SMU.
Both programming methods use trigger objects. Trigger objects generate and monitor for trigger
events. External triggers are possible using digital I/O, TSP-Link synchronization lines, LAN,
command interface, and the manual trigger (the TRIG key).
Figure 10-1 graphically represents all the trigger objects of the Series 2600A instrument.
Figure 10-1
Triggering overview
MANUAL
(front panel
TRIG key)
Manual trigger
SMU B
(2-channel
models only)
SMU A
TIMER
(8)
EVENT
BLENDER
(4)
DIGITAL I/O
(14 lines)
TSP-LINK
SYNC. LINES
(3 lines)
LAN
(8 triggers)
COMMAND
INTERFACE
Hardware triggers Communication triggers
Series 2600A
Legend:
= Trigger object
= External input trigger
= External output trigger
= Unassigned stimulus input
= Trigger events

Keithley 2600a series Specifications

General

Brand	Keithley
Model	2600a series
Category	Measuring Instruments
Language	English