Keithley 2600a series User Manual

19-54 Return to Section Topics 2600AS-901-01 Rev. B / September 2008
Section 19: Remote Commands Series 2600A System SourceMeter® Instruments Reference Manual
errorqueue
The functions and attribute in this group are used to read the entries in the error/event queue.
errorqueue.clear
Function Clears all entries out of the error/event queue.
TSP-Link
accessibility
This function can be accessed from a remote TSP-Link node.
Usage errorqueue.clear()
Remarks • This function removes all entries from the error/event queue.
Details See Appendix A (Error and Status Messages) and Appendix C (Status Model).
Also see errorqueue.count, errorqueue.next
errorqueue.count
Attribute The number of entries in the error/event queue.
TSP-Link
accessibility
This attribute can be accessed from a remote TSP-Link node.
Usage count = errorqueue.count
count The number of entries in the error queue.
Remarks • This attribute can be read to determine the number of messages in the error/event queue.
• This attribute is a variable to receive the number of entries in the error queue.
• This is a read-only attribute. Writing to this attribute will generate an error.
Details See Appendix A (Error and Status Messages) and Appendix C (Status Model).
Also see errorqueue.clear, errorqueue.next
Example Reads number of entries in the error/event queue:
count = errorqueue.count
print(count)
Output:
4.000000e+00
The above output indicates that there are four entries in the event/error queue.

Keithley 2600a series Specifications

General

Brand	Keithley
Model	2600a series
Category	Measuring Instruments
Language	English